What to do with some scap lumber

After building the bench I had some leftover 2 x 4's.  The former owner left two sheets of 1/4 inch plywood that was getting in the way.  So I decided to it to good use and make a portable work table with two sawhorses that I had.

 First cut the plywood to size 20 x 60 inches

Next cut 2 x 4's and build the frame.

Glue and screw plywood to the frame.  Put the table on the sawhorses and add tools.

miter saw and drill press.

I drilled holes in the table to bolt down the saw and drill press.